User manual

Setting Wizard
IP Address The w izard will auto setup an available IP Address to the camera.
For example: if the IP address of the netw ork is 192.168.2.x, the
wizard will search an unused IP Address from 192.168.2.250 to
192.168.2.0 and assign the camera an available IP Address.
You are allow ed to enter another IP Address to change the
setting.
Subnet Mask The w izard will auto search the Subnet Mask setting of the
netw ork and set the camera in the same Subnet Mask.
You can enter another Subnet Mask to change the setting.
Gatew ay The w izard will auto search the Gatew ay setting of the netw ork
and set the camera to use the same Gatew ay.
You can enter another Gatew ay to change the setting.
Video Port It defines the video stream port. The default value is “4321”.
Cancel Click “Cancel” to stop w izard setting.
Finish Click “Finish” to complete the camera setting.
When you finish the camera setting, you can click “Ok” to run the “Camera View er”
immediately or click “Cancel” to run the “Camera View er” later.
26