User manual

20
Send a Test Email Press this button to send a test e-mail to your mailbox. You can
use this function to test if your setting is correct.
6.2.4. PPPoE Settings
PPPoE Settings
Enable/Disable If enable the PPPoE function, IP Camera will use PPPoE for
network connection first. The default value is “Disable”.
Username Enter the Username of PPPoE connection.
Password Enter the Password of PPPoE connection
MTU A maximum transmission unit (MTU) is the largest size packet or
frame, specified in octets (eight-bit bytes), that can be sent in a
packet or frame based network such as the Internet.