User manual

45
server.
Password
Input the password of FTP server.
Port
Input the port number of FTP server, this
should an integer between 1 to 65535.
Please don’t change this value until
instructed by FTP server’s administrator.
Path
Input the path (folder) you wish to save
snapshot file on FTP server. If you don’t
want to specify folder, you can leave this
field blank, and snapshot files will be saved
in the default folder when logged onto FTP
server.
Passive mode
Default setting is ‘Enable’ (use passive
mode). If the FTP server you’re going to
use does not support passive mode (using
active mode), select ‘Disable’ here.
Click ‘Apply’ button to save changes you made. You can also click ‘Send a test
file’ button to upload a test file to FTP server, and a message box will appear to
indicate if the FTP upload is successful, so you can examine if the parameters
you set in this page are correct.