User Manual

62
2.4.1 Camera Information
Camera information allows you to set the name and administrator’s password
of this camera.
The descriptions of every setting in this menu will be given below:
Item Description
Camera Name Please specify the name of this Network Camera here.
This can be used to identify your camera on the network
when you have more than one Network Camera in the
same network.
Default name begins with ‘IC-‘ plus the last 6 characters
of the MAC address of this Network Camera. You can
modify the name to the one you can remember and
meaningful to you, but never give all Network Cameras in
the same network with same name.
Password Please specify user name ‘admin’ ‘s password here. (The
one you need when you log onto web management
interface and use ‘admin’ as user name.
Confirm
Password
Please input the same password again, to make sure
there’s no typo.
Click ‘Apply’ to save settings and make the new settings take effect.