Operation Manual

11
II. Camera Setup
II-1. EdiLife App
Follow the instructions below to connect your network camera to your Wi-Fi
using the EdiLife smartphone app. Refer to the chapter Garage Door to
connect the product to your garage door terminal.
Your network camera’s unique SSID is displayed on the product label on
the network camera and consists of “EdiView.Setup **” where ** are the
last two characters of your camera’s unique MAC address.
1. Connect the network camera to a
power supply using the included
power adapter.
2. Wait a moment for the camera to
power on. The green power LED will flash slowly when it’s ready.