Operation Manual

38
When ePTZ is selected (see below), use the
icons to zoom in and out and rotate left and
right.
Remote Control
When ePTZ is selected (see below), use the
remote control to pan/tilt the camera and
adjust the viewing position.
Preset
Adjust the camera’s viewing position to any of
four preset viewing points. Presets can be
configured in Pan & Tilt  Preset (refer to IV-
5-2. Preset)
Stretch
Stretch the fish eye view to a flat image.
ePTZ
Enable the electronic pan, tilt and zoom
functions and use the buttons on the left side
for control.
Fish Eye
Click the icon to display the standard fish eye
view.
Stretch Left
Display the left side of the view as the full
available image.
Stretch Right
Display the right side of the view as the full
available image.
5. Select “Setup” at the top center and use the menu down the left side to
navigate to the network camera’s various settings. Each menu item is
described in the following chapters.
ePTZ
Fish Eye
Stretch Right
Stretch Left
Stretch