Operation Manual

75
IV-4-3. NAS Settings
If using a NAS server for local storage, configure the settings on this page
according to your NAS.
Status
Displays the status (connected or
disconnected) of your network camera and
NAS server.
NAS IP & Sharing
Resource
Enter the local IP address of your NAS and the
path of a shared folder to store your network
camera’s recordings.
Notification for
space full
Enable or disable email notifications when
your storage space is full.
Cycle Recording
(Schedule &
Manual) (Event)
Enable or disable cycle recording for either
scheduled or manual recording, or event
recording. When enabled, cycle recording will
overwrite the earliest recordings when the
storage space becomes full. When disabled,
recording will stop when storage is full.
Max Recording File
Time
Set the maximum recording time for each file.
This applies to scheduled recordings only. For
motion or sound detection recording file
times, refer to “Events  Motion/Sound
Detection”.
Authentication
Select “Account” and enter the username and