User manual

SMTP port

Specify the port number of the SMTP server you wish to use here. By default (and

the setting of most of SMTP servers) it’s ‘25’.

SMTP Auth

Select ‘Enable’ if your SMTP server requires authentication, select ‘Disable’ if it’s

not required. If you don’t know if your SMTP server requires authentication, please

refer to the setting of your email software or ask your ISP / network administrator.

SMTP Account

Input the SMTP account (username) of your SMTP server here. In most cases, it’s

the same with your POP3 username (the one you used to receive email). Please

refer to the setting of your email software or ask your ISP / network administrator if

you’re not sure about this.

SMTP Password

Input the SMTP password of your SMTP server here. In most cases, it’s the same

with your POP3 password (the one you used to receive email). Please refer to the

setting of your email software or ask your ISP / network administrator if you’re not

sure about this.

Save settings in this tab.

Cancel

Discard all settings in this tab.