Operation Manual

59
Motion Detection
Enable or disable the motion detection
function of your network camera.
Interval Time To
Detect
After motion is detected, the network camera
will not detect motion again for this length of
time. For example, using an “Interval Time To
Detect” of 20 seconds means that after
motion is detected, the camera will not
detect any further motion for 20 seconds.
Then after 20 seconds, the camera will detect
motion again.
Upload Event File to
FTP
A video recording of a detected event can be
sent to a designated FTP server. Select
“Enable” or “Disable” for this function. When
enabled, you need to configure the FTP server
information on the “FTP” page of the “Events
 Notification” menu.
Send Event File to
Email
A video recording of a detected event can be
sent to a designated email recipient. Select
“Enable” or “Disable” for this function. When
enabled, you need to configure email settings
in the “Events  Notifications  Mail
Settings” menu.
Video Recording
Time
Specify the length of time for the email or FTP
video recording here.
Save Event Files to
NAS or SD
Enable or disable the camera’s function to
save video files to NAS or MicroSD card.
When enabled, you need to configure the
settings in the “Storage Settings” menu.
Video Recording
Time
Specify the length of time for the NAS or
microSD video recording here.