Operation Manual

68
IV-3-2-4. HTTP
The network camera can send notifications to a HTTP server which is
configured to listen. The destination server must be configured. Configure the
camera’s HTTP notification settings using the menu below. Notifications can
be sent based on motion detection events. Select “Motion Detection” from
the list to begin configurations.
List
Select motion detection for HTTP
notifications.
Notification
Enable or disable HTTP notifications.
URL
Enter the URL of the HTTP server including
the port number.
Method
Select whether to use the GET or POST
method for your HTTP server.
Authentication
Enable or disable authentication with your
HTTP server.
Username
When authentication is enabled, enter the
username.
Password
When authentication is enabled, enter the
password.
Timeout
Set a timeout interval in seconds.