Operation Manual

IV-5. Pan & Tilt

The network camera features pan and tilt capability

which can be configured using the “Pan & Tilt” menu.

Select a category from the submenu and refer to the

appropriate following chapter.

IV-5-1. Pan & Tilt Settings

Adjust the settings for your network camera’s pan/tilt function according to

your preference. You can adjust the pan/tilt speed, distance and auto-

calibration settings.

Pan/Tilt Speed

Select a pan/tilt speed from 1 (slowest) to 3

(fastest). This is the speed at which the

camera will move when you use the remote

control in “Live View”.

Pan/Tilt Distance

Select a pan/tilt distance from 1 (smallest) to

3 (largest). This is the distance which the

camera will move with each command when

you use the remote control in “Live View”.

Auto Calibration

Calibration is when the camera performs a

brief pan/tilt motion for self-maintanence.

Enable or disable auto-calibration.

Daily Auto

Calibration Time

Set the time at which the camera should

auto-calibrate each day, when auto-calibrate

is enabled (above). Auto-calibration takes a