Operation Manual

47
IV-1-5. Date & Time
You can set and adjust the network camera’s system time and date on this
page. Maintaining a correct system time is particularly important for recorded
video organization/playback.
Mode
Select ”NTP” or “Manual Setting”. NTP
(Network Time Protocol) can set and maintain
the time and date automatically via an NTP
server on the local network, if available.
Set Time & Date
Manually
For manual setting mode, enter the correct
time and date in the following format:
YYYY/MM/DD HH:MM:SS
Synchronize to PC
time
Click here to automatically enter the same
time and date as your computer.
NTP Server
For NTP mode, enter the NTP server’s
hostname or IP address.
Time Zone
Select the correct time zone.
Daylight Saving
Enable or disable daylight saving according
your local time zone.