Operation Manual

72
IV-4-3-2. FTP
Recordings of events (motion or sound detected) can be sent to a designated
FTP server. This function must be enabled in “Motion Detection” or “Sound
Detection” settings in the “Events” menu. Enter the required information
about your FTP server as shown below.
FTP Server
Enter the IP address or host name of the FTP
server.
User Name
Enter the user name required by the FTP
server.
Password
Enter the password of the FTP server.
Port
Enter the port number of the FTP server. This
value should be an integer between 1 and
65535. Please don’t change this value unless
advised by the FTP server’s administrator.
Path
Enter a path (folder) to save files on the FTP
server. If blank, files will be saved in the FTP
server’s default root folder.
Passive mode
Enable or disable passive mode according to
your FTP server.