IC-7113W Quick Installation Guide 11-2015 / v2.
Package Contents IC-7113W QIG CD-ROM Power Adapter Ethernet Cable Mounting Stand Screws LED Status LED Color Red Green Off LED Status Description On Network camera is not connected to Internet. Quick Flashing Camera starting up or resetting to factory default status. Slow Flashing (1 x per Camera is in installation mode. second) Network camera is connected to the Internet On or WPS connection successful. Slow Flashing (1 x per 2 WPS is active. seconds) Off Camera is off.
Camera Setup Follow the instructions below to setup your network camera over Wi-Fi using the EdiLife smartphone app. You can also setup your network camera using an Ethernet cable or on a computer with EdiView Finder – please refer to the user manual on the included CD-ROM. Your network camera’s unique SSID is displayed on the product label on the network camera and consits of “EdiView.Setup **” where ** are the last two characters of your camera’s unique MAC address. 1.
3. Use a smartphone or tablet to search, download and install the EdiLife app from Google Play or the Apple App Store. 4.For iOS users, go to your iPhone’s Wi-Fi settings and connect to your network camera’s SSID (EdiView.Setup **), before opening the EdiLife app. Continue to Step 7. 5.Android users open the EdiLife app and tap the + icon in the top-right corner of the screen.
6. Android users select your network camera from the available wireless device list and wait a moment for the app to make a connection. Tap refresh in the top right corner if your camera isn’t listed. 7. For better security, enter a new device name and password when prompted. Tap Done to continue.
8. Select your Wi-Fi from the list and enter your Wi-Fi password. Tap OK to continue. Tap refresh in the top right corner if your Wi-Fi isn’t listed. 9. Please wait a moment while your camera connects to your Wi-Fi. When you see the Setup complete screen, click the LIVE icon or tap the arrow to continue.
10. Setup is complete. The camera’s LED should display on and green. Your camera should be listed on the EdiLife home screen. Tap your camera to see a live stream which you can view anytime you are connected to the Internet. You can configure your camera’s settings and functions using the icons below the live image.
11.
WPS The WPS (Wi-Fi Protected Setup) button is a quick and easy alternative to establish a secure wireless connection between your network camera and your wireless router/access point. 1. Press and hold the WPS button on your wireless router/access point for the correct length of time to activate its WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button to activate WPS. 2.
Using Your Network Camera You can use the camera’s web-based management interface to see a live stream and to use the camera’s functions such as music player and temperature and humidity sensor. Go to the camera’s IP address in a web browser on a computer connected to the same local network: You can find your network camera’s IP address using EdiView Finder on a computer, or using the EdiLife smartphone app (go to Settings). Check the user manual for help.
Reset If you experience problems with your network camera, you can reset the camera back to its factory default settings. This resets all settings back to default. 1.Press and hold the WPS/Reset button found on the back panel for at least 10 seconds. Release the button when the LED is flashing quickly red. 2. Wait for the network camera to restart. The camera is ready when the LED is flashing slowly red and plays an audio tone from its speaker.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (1999/5/EC, 2006/95/EC) . Equipment: Model No.: 720p Wireless Day & Night PT Network Camera IC-7113W The following European standards for essential requirements have been followed: Spectrum: EMC: EMF: Safety (LVD): ETSI EN 300 328 V1.8.1 (2012-06) EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.