Instructions
V-1-1 Network
Network settings are displayed on this page, as shown below. You can
configure your network camera to dynamically receive a local IP address from
your router’s DHCP server or you can specify a local static IP address for your
network camera. Additionally, advanced users can configure the camera using
PPPoE.
Network
Type
Select “DHCP” to automatically assign an IP address to your
network camera from your router or “Static IP” to manually
set a static IP address using the fields below.
IP Address
Static IP users specify an IP address here, which will be the IP
address of your network camera.
Subnet Mask
Enter the subnet mask of the IP address.
Gateway
Enter the gateway address of your network.
Primary DNS
Enter the IP address of your primary DNS server.
Secondary
DNS
Enter the IP address of your secondary DNS server (optional).
HTTP Port
You can edit the HTTP port number to any value between
1024 – 65535. The default value is 80.