Instructions

V-1-5 Date & Time
You can set and adjust the network camera’s system time and date on this
page. Maintaining a correct system time is particularly important for recorded
video organization/playback.
Mode
Select ”NTP” or “Manual Setting”. NTP (Network Time
Protocol) can set and maintain the time and date
automatically via an NTP server on the local network, if
available.
Set Time & Date
Manually
For manual setting mode, enter the correct time and date in
the following format: YYYY/MM/DD HH:MM:SS
Synchronize to
PC time
Click here to automatically enter the same time and date as
your computer.
NTP Server
For NTP mode, enter the NTP server’s hostname or IP
address.
Time Zone
Select the correct time zone.
Daylight Saving
Enable or disable daylight saving according your local time
zone.