Instructions

Detection
network camera.
Interval Time
To Detect
After motion is detected, the network camera will not detect
motion again for this length of time. For example, using an
“Interval Time To Detect” of 20 seconds means that after
motion is detected, the camera will not detect any further
motion for 20 seconds. Then after 20 seconds, the camera will
detect motion again.
Upload Event
File to FTP
A video recording of a detected event can be sent to a
designated FTP server. Select “Enable” or “Disable” for this
function. When enabled, you need to configure the FTP server
information on the “FTP” page of the “Events Notification”
menu.
Send Event
File to Email
A video recording of a detected event can be sent to a
designated email recipient. Select “Enable” or “Disable” for this
function. When enabled, you need to configure the SMTP
server information on the “SMTP” page of the “Events
Notification” menu.
Video
Recording
Time
Specify the length of time for the email or FTP video recording
here.
Save Event
Files to NAS
or SD
Enable or disable the camera’s function to save video files to
NAS or MicroSD card. When enabled, you need to configure
the settings in the “Storage Settings” menu.
Video
Recording
Time
Specify the length of time for the NAS or MicroSD video
recording here.