Instructions

V-3-1-2 Detection Region
When using the network camera’s motion detection function, you can specify
the area in the video where the network camera should be sensitive to
motion. Motion outside of the detection region will be ignored by the
network camera. This is useful to avoid false alarms.
Region 1 /
Region 2 /
Region 3
Check the box to enable up to three motion detection regions.
A color-coded rectangle will appear on the video view for each
enabled region. Adjust the size and position of each box
according to your preference by clicking and dragging inside the
box (move) or on the edges (resize).
Sensitivity
Adjust the sensitivity level of motion detection for Day mode or
Night mode. A higher value will trigger the alarm for minor
motion in the video and vice-versa. You can reduce the
sensitivity level if you receive unnecessary event notifications.