Instructions

V-3-2-2 FTP
Recordings of events (motion or sound detected) can be sent to a designated
FTP server. This function must be enabled in “Motion Detection” or “Sound
Detection” settings in the “Events” menu. Enter the required information
about your FTP server as shown below.
FTP Server
Enter the IP address or host name of the FTP server.
User Name
Enter the user name required by the FTP server.
Password
Enter the password of the FTP server.
Port
Enter the port number of the FTP server. This value should be
an integer between 1 and 65535. Please don’t change this value
unless advised by the FTP server’s administrator.
Path
Enter a path (folder) to save files on the FTP server. If blank,
files will be saved in the FTP server’s default root folder.
Passive mode
Enable or disable passive mode according to your FTP server.