Instructions

V-4-3 NAS Settings
If using a NAS server for local storage, configure the settings on this page
according to your NAS.
Status
Displays the status (connected or disconnected) of your
network camera and NAS server.
NAS IP & Sharing
Resource
Enter the local IP address of your NAS and the path of a
shared folder to store your network camera’s recordings.
Notification for
space full
Enable or disable email notifications when your storage
space is full.
Cycle Recording
Enable or disable cycle recording. When enabled, cycle
recording will overwrite the earliest recordings when the
storage space becomes full. When disabled, recording will
stop when storage is full.
Max Recording
File Time
Set the maximum recording time for each file. This applies
to scheduled recordings only. For motion or sound
detection recording file times, refer to “Events 
Motion/Sound Detection”.
Authentication
Select “Account” and enter the username and password in
the fields below if your NAS server requires authentication.
Select “Anonymous” if no authentication is required.
Username
Enter the username if “Account” is selected above.
Password
Enter the password if “Account” is selected above.