Instructions

V-4-4 SD Card Settings
The “Basic” menu enables you to set the camera’s name and administrator
password, as well as switch the LED(s) on/off according to your preference.
Unmount your MicroSD card using the “Unmount” button before
removing the card from your network camera.
Status
Displays the MicroSD card status of your network camera:
available or unavailable.
Available
Space
Displays the available space on the MicroSD card in your
network camera.
Notify when
space is not
enough
Enable or disable email notifications when your storage space
is full.
Cycle
Recording
Enable or disable cycle recording. When enabled, cycle
recording will overwrite the earliest recordings when the
storage space becomes full. When disabled, recording will stop
when storage is full.
Max
Recording File
Time
Set the maximum recording time for each file. This applies to
scheduled recordings only. For motion or sound detection
recording file times, refer to “Events  Motion/Sound
Detection”.
Format SD
Card
Click to format your MicroSD card. This will erase all data on
your MicroSD card.
Unmount
Click to unmount your MicroSD card from the network
camera. This is recommended before removing the MicroSD
card from the camera.