Quick Installation Guide

5
3. Connect the power adapter to the indoor main unit and to a power
supply.
4. Wait a moment for the camera to power on. The green power LED will
flash slowly when it’s ready.
Refer to the respective sections to connect your network camera to your
network using either:
A. Using the free EdiLife app on Android or iPhone; or
B. Using WPS (Wi-Fi Protected Setup), a simple method to connect your
camera to your wireless network.
After connecting your camera to your network using one of the methods
above, you can view your camera’s live image or configure its settings.
Follow the instructions in Outdoor Installation if you need help installing your
camera outside.