IC-9110W Quick Installation Guide (English) 12-2014 / v1.
Package Contents Outdoor Image Unit UnitImage Unit Outdoor Image Unit Outdoor Image Unit Screws Indoor Main Unit Unit Ethernet Cable Indoor Main Unit Screws Wall Template CD-ROM Power Adapter Antenna 2 Adhesive Pad Quick Installation Guide
LED Status LED LED Color LED Status Description Network camera is on and connected to cloud server. On Power Green Quick Flashing Slow Flashing (1 x per second) On LAN Green Quick Flashing Slow Flashing (1 x per second) On Internet Orange Network camera is restarting. Network camera is starting up OR network camera is not connected to cloud server. Network camera is connected to the local network. LAN activity (transferring data). WPS is active. Connected to Internet.
Camera Setup It is recommended that you setup your network camera as shown below and establish a working connection before you install the camera to its outdoor location. Your network camera’s unique SSID is displayed on the product label on the product’s indoor case and consits of “EdiView.Setup**” where ** are the last two characters of your camera’s unique MAC address. 1.Screw on the included antenna to the product’s indoor main unit. 2.Connect the outdoor image unit cable to the indoor main unit.
3.Connect the power adapter to the indoor main unit and to a power supply. 4.Wait a moment for the camera to power on. The green power LED will flash slowly when it’s ready. 5. Use a smartphone or tablet to search, download and install the EdiView II app from Google Play or the Apple App Store.
.For iOS users, go to your iPhone’s Wi-Fi settings and connect to your network camera’s SSID, before opening the EdiView II app. Continue to Step 8. 7. Android users ensure your Android device’s Wi-Fi is switched on, and open the EdiView II app. Select your network camera and click “OK” to continue. 8. Android & iOS users select your Wi-Fi network from the list and then enter your Wi-Fi password, before clicking “OK”.
If prompted to allow push notifications, please select “Yes”. 9. Please wait a moment while your camera connects to your Wi-Fi. When you see the “Setup complete” screen, click the “Live” icon to continue or wait for a few seconds to continue automatically.
10. Setup is complete. The camera’s green power LED should display on. You should see a live stream from your network camera which you can view anytime you are connected to the Internet. It is recommended that you change your camera’s password. Go to “More” in the bottom right corner and select “Settings”. You can configure your camera’s settings and functions using the icons below the live image.
WPS The WPS button is a quick and easy alternative to establish a secure wireless connection between your network camera and your wireless router/access point. 1. Press and hold the WPS button on your wireless router/access point for the correct length of time to activate its WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button to activate WPS. 2.
Outdoor Installation Refer to the user manual for detailed instructions.
Reset If you experience problems with your network camera, you can reset the camera back to its factory default settings. This resets all settings back to default. 1.Press and hold the WPS/Reset button found on the back panel for at least 10 seconds. 2. Release the button when the green power LED is flashing quickly. 3. Wait for the network camera to restart. The camera is ready when the green power LED is flashing slowly.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/95/EC, 2006/95/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/95/CE, 2006/95/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/95/ES, 2006/95/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (1999/5/EC, 2006/95/EC) Equipment: Internet Camera Model No.: IC-9110W The following European standards for essential requirements have been followed: Spectrum : ETSI EN 300 328 V1.8.1 (2012-06); EMC : EN 301 489-1 V1.9.2 (2011-09) EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
