User manual

8
10. Setup is complete. The camera’s green power LED should display on.
You should see a live stream from your network camera which you can
view anytime you are connected to the Internet.
It is recommended that you change your camera’s password. Go to “More”
in the bottom right corner and select “Settings”.
You can configure your camera’s settings and functions using the icons
below the live image.
You can also use the web based management interface to watch a live stream
and further configure the camera if you need (refer to the user manual).
And you can additionally view the camera’s live image from any Internet
connection and web browser using the cloud ID (refer to the user manual).
Follow the instructions in Outdoor Installation if you need help installing your
camera outside.