User Manual

21
Users will be able to select a value to display the number of entries in one page. The following values
can be selected - “10”, “25”, “50”, and “100” selections. By default, “10” is selected.

The search option enables you to search a key word in the data. It will search all the columns and
identify the data rows that match the search criteria.

It displays the total number of entries and the current entry number.

and
This option orders the field from smaller to larger or from larger to smaller.

Changes to “First”, “Previous”, “Next”, or “Last” page.
In addition to the above functions, “Refresh” and “Auto Refresh” function are available for all status
page including “IPv6 Neighbor Table”, “RSTP Port Status”, “Port Status”, “IGMP Snooping Table”,
“VLAN Table”, “Trunking Status”, “LLDP Neighbor Table”, and “MAC Address Table”.

Selecting this checkbox enablesthe “Auto Refresh” function and deselecting the checkbox disables
the“Auto Refresh” function.

The Refresh Rate option is a global configurable variable. When the Auto Refresh option is enabled,
the status will refresh automatically based on the Refresh Rate interval.
The range of the Refresh Rate is from 5 to 300 second(s).
The default Refresh Rate is 5 seconds.

(Refresh Button)
You can click the “Refresh” button to manually refresh the status.