User Manual

36
CONFIGURE MSTI PORT INFORMATION

Instance Selector
Select the instance to configure the ports. The Instance No. is from 1 to 15.

No.
Port1 to PortN, where N is based on the total port number.

Path Cost
The Path Cost is the costfrom the current node to another device.
The range of the Path Cost is from 0 to 200000000.
The default Path Cost is 0. This implies that the Path Cost is decided by the system.

Port Priority
This is used to identify the port to be blocked in the Ring topology.
The range of the Root Priority is from 0 to 240 and isin multiples of 16.
The default Root Priority is 128.

(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.