User Manual

51
CONFIGURE DHCP RELAY INFORMATION

Relay Basic Settings
。 Relay Mode
“Enable” or “Disable” the DHCP Relay function.
。 Relay Option82
“Enable” or “Disable” the DHCP Relay with Option82 tag.
。 Helper Address 1 - 4
The IP Addresses of the DHCP Servers provide IP addresses to the DHCP Clients. A backup of Four
Helper Addresses are available during breakdown.

Relay Untrust
。 No.
Port1 to PortN, where N is based on the total port number.
。 Untrust Status
“Enable” or “Disable” to untrust the specific port. If the untrusted status is enabled on a port, the
system will drop the DHCP management frames on the port.

(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.