User Manual

3
I-1 . Product Brief Description
Introduction
This switch is a DIN Rail type industrial Gigabit managed Power over Ethernet Switch is designed with eight
10/100/1000M PoE+ ports and four Gigabit SFP slots for highly critical PoE applications such as real time IP
video surveillance, WiMAX systems and Wireless APs. All of the 8 ports of the switch are compliant with both
IEEE 802.3af PoE and IEEE 802.3at high power PoE standards and can deliver up to 15.4W and 30W power per
port to enable the high-power requiring devices, such as Wireless APs, PTZ and dome network cameras, etc.
Ethernet Ring Protection Switching (ERPSv2)
Ring network topology ensures the reliability of the connections among all the switches in the network. This
switch supports ERPSv2 with easy to set up user interface, which allows it to recover from network
disconnection in less than 20ms with 250 IGP-8804M2s connected in a ring network topology while
transmitting/receiving data at full network speed. Also, it supports multiple ERPS instances, allowing different
VLANs have their own ERPS instances.
USB Port for Save/Restore Configuration & System Log/Firmware Storage
This switch comes with a USB port for connecting a USB storage device to the industrial switch. Configuration
files, switch system log and firmware can be stored in the USB storage device for the switch to access. When a
USB storage device is connected to this switch, it will load the configuration file in the storage device and apply
all the settings, saving on-site installation time and effort.
Redundant Power Inputs & Embedded Protecting Circuit
This switch provides two power inputs that can be connected simultaneously to live DC power source. If one of
the power input fails, the other live source acts as a backup to automatically support the switch’s power needs
without compromising network service qualities. Also, it supports automatic protection switching and load
balance, while its embedded protecting circuit can protect your system from over input/output voltages and
rectifier malfunctions.
Outstanding Management and Enhanced Security
This switch provides various network control and security features to ensure the reliable and secure network
connection. To optimize the industrial network environment the switch supports advanced network features,
such as Tag VLAN, IGMP Snooping, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Rate
Control, etc. The PoE switch can be smartly configured through Web Browser, SNMP Telnet and RS-232 local
console with its command like interface. The failure notifications are sent through e-mail, SNMP trap,
Local/Remote system log, multiple event alarm relay.