User Manual

86
Configure 802.1X Port Information

Port Settings
。 No.
Port 1 to Port N, where N is based on the total port number.
。 Enable
“Enable” or “Disable” 802.1X function on the port.“Yes” means 802.1X is enabled on the port and
the port is locked until it passes the authentication.
。 Mode
Select the 802.1X mode to “Mac-based” or “Port-based”.
Mac-based: Only the MAC Address, which passed the authentication can connect to the networks.
Port-based: If the port had passed the authentication, every device connected to the port can
connect to the networks.
。 Re-Auth
“Enable” or “Disable” re-authentication on the port. “Yes” means re-authentication is enabled on
the port and the port has to re-authenticate with the server every re-auth period.
。 Re-Auth Period
This is a time interval, which is used in re-authenticating the server.

(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.