Quick Installation Guide

ManualsBrandsEdimax ManualsIndustrial & ScientificIndustrial 16-Port Gigabit PoE+ Web Managed Switch with 8 PoE+ Ports and 4 SFP Slots

1

2

3

4

5

6

7

8

9

Table Of Contents

3

IGS-5416P: 145 mm (H) x 90.80 mm (W) x 113 mm (D)

2. DIN-Rail mount

The DIN-Rail clip is already attached on the rear side of the switch supports EN 50022 standard DIN

Rail, in the following diagram includes the dimension of EN 50022 DIN Rail.

Follow the steps below to mount the switch on the DIN-Rail track.

1. Insert the upper end of the DIN-Rail clip into the

back of the DIN-Rail track from its upper side

2. Lightly push the bottom of the DIN-Rail clip into the

track.

3. Check if the DIN-Rail clip is tightly attached to the

track.

4. To remove the switch from the track, reverse the

steps above.