User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
100
III-10. Web Management – Maintenance
III-10-1. MAINTENANCE – AUTHORIZATION
The "Username" and "Password" are very important information both in the "Command Line Interface"
or "Web Console". Users have to login into the system before doing any configuration. We strongly
suggest the users to change at least the password for security when they are going to use this device.
We also provide authentication with RADIUS/TACACS+ server from software version 1.0.3. Users can
maintain the login information in their own RADIUS/TACACS+ database and allow several
usernames/passwords to login the system.
CONFIGURE LOGIN INFORMATION
•
Mode
There are three modes for login authentication.
Local: The username and password are defined in the system.
Radius: The username and password are defined in the RADIUS server and when users login the
system, the system will authenticate with the RADIUS server to get the login permission. The
password will be encrypted during the transmitting.
Tacacs+: The username and password are defined in the TACACS+ server and when users login the
system, the system will authenticate with the TACACS+ server to get the login permission. The whole
payload and password will be encrypted during the transmitting.
•
Username
The account used to login to the system.
The maximum length of the Username is 20 characters
Only alphabet (A-Z, a-z) and numbers (0-9) are allowed.
The default Username is admin.
•
Password
The password used to login to the system. We provide password strength bar for reference. There
are 3 levels - Weak, OK, and Great. We strongly recommend users configuring the password to
“Great” level for security.
The maximum length of the Password is 20 characters.
Only alphabet (A-Z, a-z) and numbers (0-9) are allowed.
The default Password is admin.
•
Confirm Password
It is used to confirm the value specified by the users in the "Password" field. The value of the field
must be the same as "Password".
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.