User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
102
CONFIGURE TACACS+ SERVER INFORMATION
This section only display when the mode in the Basic Settings is set to “Tacacs+”.
•
Server IP
The IP address of the TACSCS+ server must in the same subnet as the IP address of the switch.
•
Server Port
The port is listening to the TACSCS+ service on the TACSCS+ server.
The range of the Server Port is from 1 to 65535.
The default Server Port is 49.
•
Shared Key
The Shared Key is a string that used to build the connection with the TACSCS+ server. It must be the
same as the string/secret set in the TACSCS+ server.
The maximum length of the Shared Key is 32 characters.
•
Timeout
The time interval is used to waiting for the response from the TACSCS+ server.
The range of the Timeout is from 1 to 1000 seconds.
The default Timeout is 30 seconds.
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.