User Manual

Table Of Contents
105
Upgrade Firmware Version - Copy Firmware File from USB
Image File Name
Enter the name of the firmware image in the USB. The system will try to identify the file with
specified file name to upload it to the system.
(Upload Button)
After entering the firmware image name, click "Upload" button to copy it from the USB to the
system.
UPGRADE FIRMWARE PROCESS - COPY FIRMWARE FILE FROM USB
1. Copying the firmware image from USB to switch
The system will also check if the USB is inserted and file exists.
2. Verifying the uploaded file
After copying the firmware file to switch, the system starts to verify the uploaded file to make sure
it is valid. By default, the firmware image is encrypted to prevent the attack on man-in-the-middle.
Optionally, higher encryption methodology is also provided.
3. Installing the uploaded firmware image
The new firmware will install after the system makes sure it is valid.