User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
115
IPV6 GROUP
Command
Explanation
Mode
ipv6 address add [IPV6_ADDR</PREFIX_LEN>]
Add an address and netmask of IPv6
Configure
ipv6 enable
Enable IPv6 protocol
Configure
ipv6 neighbor flush
Issue a neighbor flush command of IPv6
Configure
ipv6 ping [IPV6_ADDR] [<size PKG_SIZ> | <repeat
PKG_CNT>]
Issue an IPv6 ping command Configure
show ipv6
Display IPv6 protocol state
Configure
show ipv6 address
Display IPv6 addresses
Configure
show ipv6 default address
Display default IPv6 address
Configure
show ipv6 neighbor
Display neighbor cache of IPv6
Configure
no ipv6
Disable IPv6 protocol
Configure
no ipv6 address add [IPV6_ADDR/PREFIX_LEN]
Delete IPv6 address
Configure
TIME GROUP
Command
Explanation
Mode
clock time [hh:mm:ss] [day] [month] [year]
Configure time
Configure
clock timezone [AREA] [CITY]
Configure time zone
Configure
ntp client sync [minute | hour | day | month | year]
[NUMBER]
Configure NTP client sync Configure
ntp client timeserver [SERVER_IP/URL]
Configure NTP client time server
Configure
ntp time update
Configure NTP time update
Configure
show clock time
Show time
Configure
show clock timezone
Show timezone
Configure
show ntp client sync
Show sync time
Configure
show ntp client timeserver
Show NTP server configuration
Configure
no clock timezone
Remove timezone
Configure
no ntp client sync
Remove NTP sync time
Configure
no ntp client timeserver
Remove NTP time server configuration
Configure