User Manual

118
SNMP GROUP
Command
Explanation
Mode
snmp server community ro [COMMUNITY]
Set v1, v2c snmp server read-only community
Configure
snmp server community rw [COMMUNITY]
Set v1, v2c snmp server read-write community
Configure
snmp server enable
Enable snmp server
Configure
snmp server enable v1-v2c-only
Enable snmp v1 and v2c
Configure
snmp server enablev3-only
Enable snmp v3 command only
Configure
snmp server v3 auth admin [md5| sha] [PASSWORD]
Set SNMPv3 admin authentication type
Configure
snmp server v3 auth user [md5| sha] [PASSWORD]
Set SNMPv3 user authentication type
Configure
snmp server v3 encryption admin [des| aes]
[PASSWORD]
Set SNMPv3 admin encryption type Configure
snmp server v3 encryption user [des| aes]
[PASSWORD]
Set SNMPv3 user encryption type Configure
snmp server v3 level admin [auth| noauth| priv]
Set SNMPv3 admin security level
Configure
snmp server v3 level user [auth| noauth| priv]
Set SNMPv3 user security level
Configure
snmp trap community [COMMUNITY]
Set v1, v2c snmp trap community
Configure
snmp trap host [TRAP_HOST_IP]
Set snmp trap host IP address
Configure
snmp trap inform retry [1-100]
Set snmp inform retry times
Configure
snmp trap inform timeout [1-300]
Set snmp inform timeout
Configure
snmp trap v3 auth [sha| md5] [PASSWORD]
Set SNMPv3 authentication type: md5 or sha
Configure
snmp trap v3 encryption [des| aes] [PASSWORD]
Set SNMPv3 encryption type: des or aes
Configure
snmp trap v3 engine-ID [ENGINE_ID]
Set snmp trap engine ID
Configure
snmp trap v3 level [auth| noauth| priv]
Set SNMPv3 trap security level
Configure
snmp trap v3 user [USER_ID]
Set SNMPv3 trap user
Configure
snmp trap version [1| 2c trap| 2c inform| 3 trap| 3
inform]
Set snmp trap version and type Configure
show snmp server
Display snmp server status
Configure
show snmp server community ro
Display snmp server read only community
Configure
show snmp server community rw
Display snmp server writable community
Configure
show snmp server v3 auth admin
Display SNMPv3 admin authentication type and
passphrase
Configure
show snmp server v3 auth user
Display SNMPv3 user authentication type and
passphrase
Configure
show snmp server v3 encryption admin
Display SNMPv3 admin encryption type and
passphrase
Configure
show snmp server v3 encryption user
Display SNMPv3 user encryption type and
passphrase
Configure
show snmp server v3 level admin
Display SNMPv3 admin security level
Configure
show snmp server v3 level user
Display SNMPv3 user security level
Configure
show snmp trap community
Display snmp trap community
Configure
show snmp trap host
Display snmp trap host
Configure
show snmp trap inform retry
Display snmp inform retry times
Configure
show snmp trap inform timeout
Display snmp inform timeout
Configure
show snmp trap v3 auth
Display SNMPv3 authentication type and
passphrase
Configure
show snmp trap v3 encryption
Display SNMPv3 encryption type and passphrase
Configure
show snmp trap v3 engine-ID
Display snmp trap engine ID
Configure
show snmp trap v3 level
Display SNMPv3 trap security level
Configure
show snmp trap v3 user
Display SNMPv3 trap user
Configure
show snmp trap version
Display snmp trap version and type
Configure
no snmp server
Disable snmp server
Configure
no snmp server community ro
Default ro-community name
Configure
no snmp server community rw
Default rw-community name
Configure
no snmp server v3 auth admin
Default SNMPv3 admin authentication type
Configure
no snmp server v3 auth user
Default SNMPv3 user authentication type
Configure
no snmp server v3 encryption admin
Default SNMPv3 admin encryption type
Configure
no snmp server v3 encryption user
Default SNMPv3 user encryption type
Configure
no snmp server v3 level admin
Default SNMPv3 admin security level
Configure
no snmp server v3 level user
Default SNMPv3 user security level
Configure
no snmp trap community
Default snmp trap community
Configure
no snmp trap host
Default snmp trap host
Configure
no snmp trap inform retry
Default snmp inform retry times
Configure