User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
120
DHCP GROUP
Command
Explanation
Mode
boot host dhcp
Directs the system to get an IP address
Configure
dhcp relay information option
Set DHCP-relay option
Configure
dhcp relay server [server_number: 1-4] [server_IP]
Set DHCP-relay server [1-4] IP
Configure
dhcp relay untrust
Set DHCP-relay untrusted port
Interface
dhcp server binding [bind_ID: 1 - 32] [MAC]
[IP_TO_BIND]
Set binding IP and MAC of DHCP Configure
dhcp server default-gateway [IP_ADDR]
Set default-gateway IP for DHCP client
Configure
dhcp server included-address [START_OF_IP]
[END_OF_IP]
Set IP range for its client Configure
dhcp server lease [60-2592000]
Set DHCP server lease time
Configure
dhcp server name-server [IP_ADDR]
Set name-server address for DHCP client
Configure
dhcp service relay enable
Enable DHCP relay
Configure
dhcp service server enable
Enable DHCP server
Configure
show boot host dhcp
Display DHCP client state
Configure
show dhcp relay information option
Display DHCP relay option
Configure
show dhcp relay server [server_number: 1-4]
Display DHCP relay address
Configure
show dhcp relay untrust
Display DHCP untrusted port status
Interface
show dhcp server binding
Display all DHCP bounding entries
Configure
show dhcp server default-gateway
Display DHCP default-gateway IP
Configure
show dhcp server included-address
Display DHCP included IP range
Configure
show dhcp server lease
Display DHCP server lease time
Configure
show dhcp server name-server
Display DHCP name-server
Configure
show dhcp server status
Display DHCP server status
Configure
show dhcp service relay
Display DHCP relay agent status
Configure
show dhcp service server
Display DHCP server status
Configure
no boot host dhcp
Disable DHCP client
Configure
no dhcp relay information option
Disable DHCP relay option
Configure
no dhcp relay server [server_number: 1-4]
Remove DHCP relay server [1-4] IP
Configure
no dhcp relay untrust
Default port as trusted
Interface
no dhcp server binding [bind_ID: 1-32]
Remove DHCP bounding IP and MAC
Configure
no dhcp server default-gateway
Remove DHCP default-gateway IP
Configure
no dhcp server included-address
Remove DHCP included IP range
Configure
no dhcp server lease
Remove DHCP lease time
Configure
no dhcp server name-server
Remove DHCP name-server
Configure
no dhcp service relay
Disable DHCP relay
Configure
no dhcp service server
Disable DHCP server
Configure
INDUSTRIAL PROTOCOLS GROUP
Command
Explanation
Mode
ethernet-ip enable
Enable EtherNet/IP Protocol
Configure
modbus tcp enable
Enable Modbus/TCP Protocol
Configure
show ethernet-ip
Show EtherNet/IP status
Configure
show modbus tcp
Show Modbus/TCP status
Configure
no ethernet-ip
Disable EtherNet/IP Protocol
Configure
no modbus tcp
Disable Modbus/TCP Protocol
Configure