User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
121
UPNP GROUP
Command
Explanation
Mode
upnp advertisement interval [300-86400]
Set UPnP advertisement interval
Configure
upnp enable
Enable Universal Plug and Play (UPnP)
Configure
show upnp
Display Universal Plug and Play (UPnP) state
Configure
show upnp advertisement interval
Display UPnP advertisement interval
Configure
no upnp
Disable Universal Plug and Play (UPnP)
Configure
no upnp advertisement interval
Default UPnP advertisement interval
Configure
PORT GROUP
Command
Explanation
Mode
flowcontrol [on | off]
Configure port's flow-control to response a pause frame
Interface
name [PORT_NAME]
Set interface name
Interface
shutdown
Disable port
Interface
speed_duplex [10 | 100] [full | half]
Configure port's speed and duplex
Interface
show interface all link summary
To display interface link status globally
Configure
show administrate
To display port's admin state
Interface
show flowcontrol
Display port's flow-control state
Interface
show link duplex
To display port's duplex
Interface
show link rx
To display port's Rx_Bytes
Interface
show link speed
To display port's speed
Interface
show link state
To display port's link state
Interface
show link summary
To display port's link summary
Interface
show link tx
To display port's Tx_Bytes
Interface
show name
To display port's name
Interface
show speed_duplex
To display port's speed and duplex
Interface
show transceiver
Transceiver information
Interface
no flowcontrol
Default flow-control as Auto mode
Interface
no name
Remove port's name
Interface
no shutdown
Enable port
Interface
no speed_duplex
Default port speed-duplex as Auto mode
Interface