User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
122
POE GROUP
Command
Explanation
Mode
power inline budget[0-5000]
Power PoE budget
Configure
power inline mode [actual | class | static]
PoE priority mode selection
Configure
power inline force
Force PoE powered on port
Interface
power inline limit [4-35]
Set PoE port power limit on port
Interface
power inline never
Disable PoE on port
Interface
power inline priority [1-3]
Set PoE port priority on port; 1:high, 2:middle, 3:low
Interface
keepalive enable
Enable PoE keepalive
Interface
keepalive hold-time
Configure PoE keepalive power cycle hold-time
Interface
keepalive ip
Configure IP for PoE keepalive
Interface
keepalive time
Configure PoE keepalive cycle time
Interface
schedule enable
Enable one port PoE schedule
Interface
schedule [Sunday-Saturday] open-time [time]
Configure PoE schedule open time on one day
Interface
show power inline budget
Display PoE power budget
Configure
show power inline mode
Display PoE priority mode selection
Configure
show power inline operation
Display All PoE ports operation status
Configure
show power inline status
Display All PoE ports detail status
Configure
show power inline status
Display PoE status for specific port
Interface
show keepalive table
Display All PoE keepalive info
Configure
show power inline status
Display PoE status
Interface
show keepalive
Show PoE keepalive status
Interface
show keepalive hold-time
Show PoE keepalive hold-time
Interface
show keepalive ip
Show IP for PoE keepalive
Interface
show keepalive time
Show PoE keepalive cycle time
Interface
show schedule
Disable Universal Plug and Play (UPnP)
Interface
show schedule [Sunday-Saturday] open-time
Show open time of POE schedule on one day
Interface
show schedule table
Show one port PoE schedule table
Interface
no power inline budget
Default PoE power budget
Configure
no power inline mode
Default PoE priority mode
Configure
no power inline force
Disable force PoE powered on port
Interface
no power inline limit
Disable PoE port power limit on port
Interface
no power inline never
Enable PoE on port
Interface
no power inline priority
Disable PoE port priority on port
Interface
no keepalive
Disable PoE keepalive
Interface
no keepalive hold-time
Default PoE keepalive power cycle hold-time
Interface
no keepalive ip
Remove IP for PoE keepalive
Interface
no keepalive time
Remove PoE keepalive cycle time
Interface
no schedule
Remove one port PoE schedule
Interface
no schedule [Sunday-Saturday] open-time
Remove PoE schedule on one day
Interface