User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
125
STORM CONTROL GROUP
Command
Explanation
Mode
storm-control broadcast enable
Enable the broadcast storm control
Configure
storm-control broadcast level [low | mid | high]
Set the broadcast storm control level
Configure
storm-control multicast enable
Enable the multicast storm control
Configure
storm-control multicast level [low | mid | high]
Set the multicast storm control level
Configure
storm-control unknown-unicast enable
Enable the unknown-unicast storm control
Configure
storm-control unknown-unicast level [low | mid |
high]
Set the unknown-unicast storm control level Configure
show storm-control broadcast
Display the broadcast storm control status
Configure
show storm-control broadcast level
Display the broadcast storm control level
Configure
show storm-control multicast
Display the multicast storm control status
Configure
show storm-control multicast level
Display the multicast storm control level
Configure
show storm-control unknown-unicast
Display the unknown-unicast storm control
status
Configure
show storm-control unknown-unicast level
Display the unknown-unicast storm control level
Configure
no storm-control broadcast
Disable the broadcast storm control
Configure
no storm-control broadcast level
Default the broadcast storm control to level high
Configure
no storm-control multicast
Disable the multicast storm control
Configure
no storm-control multicast level
Default the multicast storm control to level high
Configure
no storm-control unknown-unicast
Disable the unknown-unicast storm control
Configure
no storm-control unknown-unicast level
Default the unknown-unicast storm control to
level high
Configure
802.1X GROUP
Command
Explanation
Mode
dot1x authentication server [1|2] ip [IP]
Set 802.1X authentication server 1 or 2 address
Configure
dot1x authentication server [1|2] port [PORT]
Set 802.1X authentication server 1 or 2 port
Configure
dot1x authentication server [1|2] share-key [KEY]
Set 802.1X authentication server 1 or 2
share-key
Configure
dot1x authentication server type [local|radius]
Set 802.1X authentication server type
Configure
dot1x enable
Enable 802.1X protocol
Configure
dot1x local-db [USER] [PASSWORD]
Set 802.1X local user database
Configure
dot1x authenticator enable
Set 802.1X authenticator
Interface
dot1x mode [mac-based | port-based]
Set 802.1X mode as 1. MAC-based, 2.Port-based
Interface
dot1x reauthentication enable
Set 802.1X reauthentication
Interface
dot1x reauthentication period [60-65535]
Set 802.1X reauthentication period
Interface
show dot1x
Display 802.1X protocol state
Configure
show dot1x authentication server [1|2] ip
Display 802.1X authentication server 1 or 2
address
Configure
show dot1x authentication server [1|2] port
Display 802.1X authentication server 1 or 2 port
Configure
show dot1x authentication server [1|2] share-key
Display 802.1X authentication server 1 or 2 key
Configure
show dot1x authentication server type
Display 802.1X authentication server type
Configure
show dot1x brief
Display 802.1X information
Configure
show dot1x local-db
Display 802.1X users and password in database
Configure
show dot1x server brief
Display 802.1X RADIUS server
Configure
show dot1x authenticator
Display 802.1X authenticator state
Interface
show dot1x mode
Display 802.1X mode config
Interface
show dot1x reauthentication
Display 802.1X reauthentication state
Interface
show dot1x reauthentication period
Display 802.1X reauthentication period(in sec.)
Interface
no dot1x
Disable 802.1X protocol
Configure
no dot1x authentication server [1|2] ip
Default 802.1X authentication server 1 or 2
address
Configure
no dot1x authentication server [1|2] port
Default 802.1X authentication server 1 or 2 port
Configure
no dot1x authentication server [1|2] share-key
Default 802.1X authentication server 1 or 2
share-key
Configure
no dot1x authentication server type
Default 802.1X authentication server type
Configure
no dot1x local-db [USER]
Remove an entry in 802.1X local database
Configure
no dot1x authenticator
Disable 802.1X authenticator
Interface
no dot1x mode
Default 802.1X mode as MAC-based
Interface
no dot1x reauthentication
Disable 802.1X reauthentication
Interface
no dot1x reauthentication period
Default 802.1X reauthentication period
Interface