User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
19
2. Save Configuration
After configuring, click the icon to save the configurations to the "startup-config" file. The configurations
are retained in the system until a factory reset default is done.
3. Restore Factory Default
Removes the configurations saved in the system. After restoring factory default, all the settings will be
set to default values.
4. Reboot System
Reboots the device and restarts the system.
5. System Logout
This option enables you to sign out from the system. Users have to login again if they want to configure
the settings.
The system will auto-logout after the "timeout" timer expires. The "timeout" timer is configured in the
CLI mode by using the "exec-timeout" command.
The maximum value of the timer in the web console is 30 minutes.
A USER-FRIENDLY DATA TABLE
A user-friendly data table is provided on the“IPv6 Neighbor Table”, “IGMP Snooping Table”, “ VLAN
Table”, “LLDP Neighbor Table”, and “MAC Address Table”. The following section details how to use the
data table functions to help the users to observe the information easily.
The following example is “MAC Address Table”.
•
Users will be able to select a value to display the number of entries in one page. The following values
can be selected - “10”, “25”, “50”, and “100” selections. By default, “10” is selected.
•
The search option enables you to search a key word in the data. It will search all the columns and
identify the data rows that match the search criteria.
•
It displays the total number of entries and the current entry number.
•
and
This option orders the field from smaller to larger or from larger to smaller.