User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
31
•
Oper. P2P
This field shows the link-type of the STP port. P2P means “point-to-point” and Shared means
“point-to-multiple”.
•
Oper. Edge
This field shows the edge state of this STP port.
C
ONFIGURE MSTI INFORMATION
•
Basic Settings
。 Region Name
The Region Name is the name of the MST Region. The switches in the same MST Region must be
set to the same Region Name.
The max length for the Region Name is 32 characters.
Note: #, \, ', ", ? are invalid characters.
。 Revision Number
The Revision Number is the level of the MST Revision. The switches in the same MST Region must
be set to the same Revision Number.
The range of the Revision Number is from 0 to 65535.
The default Revision Number is 0.