User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
33
CONFIGURE MSTI PORT INFO RMATION
•
Instance Selector
Select the instance to configure the ports. The Instance No. is from 1 to 15.
•
No.
Port1 to PortN, where N is based on the total port number.
•
Path Cost
The Path Cost is the cost from the current node to another device.
The range of the Path Cost is from 0 to 200000000.
The default Path Cost is 0. This implies that the Path Cost is decided by the system.
•
Port Priority
This is used to identify the port to be blocked in the Ring topology.
The range of the Root Priority is from 0 to 240 and is in multiples of 16.
The default Root Priority is 128.
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.