User Manual

Table Of Contents
40
CONFIGURE SNMP SERVER INFO RMATIO N
Basic Settings
SNMP Version
The system enables the SNMP “v1, v2c and v3” authentication by default. The users can enable
the SNMP server on only “v1 and v2c” or “v3”. None” refers to disabling the SNMP server.
Read Only Community
The community used to access the SNMP server with the “read-only” privilege.
The max length for the Read Only Community is 32 characters.
Note: #, \, ', ", ? are invalid characters.
Read-Write Community
The community used to access the SNMP server with the “read-write” privilege.
The max.length for the Read-Write Community is 32 characters.
Note: #, \, ', ", ? are invalid characters.
SNMPv3 Settings
This section is displayed only when the SNMP Version is set to “v3” or “v1, v2c and v3”. Two
accounts are provided Admin and User to access the SNMP agent. The users can set different levels
for the 2 accounts.
Security Level
No Authentication, No Privacy: Access by an account “admin” or “user.
Authentication, No Privacy: Access by an account “admin” or “user with password.