User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
51
CONFIGURE POE SCHEDULE
•
Port Selector
Select the port number to configure the PoE Schedule.
Port1 to PortN, where N is based on the total PoE port number.
•
Schedule Mode
“Enable” or “Disable” to provide power by the schedule on the specific port.
•
Enable (for each day)
The week is from Sunday to Saturday.
•
Week (The x-ray of the table)
The week is from Sunday to Saturday.
•
Hour (The y-ray of the table)
The hour is from 00 (00:00) to 23 (23:00).
Users can select the checkbox with the Week and Hour in the table to enable the PoE Schedule on
the specific time. For example, if the user wants the PoE to be enabled only on Monday from 6:00 to
7:00 and on Wednesday from 13:00 to 15:00, the following checkboxes must be selected–“Mon-06 ”,
“Mon-07”, “Wed-13 ”, “We d-14”, and “Wed-15”.
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.