User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
3
I-1 . Product Brief Description
Introduction
This switch is a DIN Rail type industrial Gigabit managed Power over Ethernet Switch is designed with
eight 10/100/1000M PoE+ ports, eight 10/100/1000M RJ45 ports and four Gigabit SFP slots for highly
critical PoE applications such as real time IP video surveillance, WiMAX systems and Wireless APs. All 8
PoE ports of the switch are compliant with both IEEE 802.3af PoE and IEEE 802.3at high power PoE
standards and can deliver up to 15.4W and 30W power per port to enable the high-power requiring
devices, such as Wireless APs, PTZ and dome network cameras, etc.
Ethernet Ring Protection Switching (ERPSv2)
Ring network topology ensures the reliability of the connections among all the switches in the network.
This switch supports ERPSv2 with easy to set up user interface, which allows it to recover from network
disconnection in less than 20ms with 250 switches connected in a ring network topology while
transmitting/receiving data at full network speed. Also, this switch supports multiple ERPS instances,
allowing different VLANs have their own ERPS instances.
USB Port for Save/Restore Configuration & System Log/Firmware Storage
This switch comes with a USB port for connecting a USB storage device to the industrial switch.
Configuration files, switch system log and firmware can be stored in the USB storage device for the
switch to access. When a USB storage device is connected to the switch, it will load the configuration file
in the storage device and apply all the settings, saving on-site installation time and effort.
Redundant Power Inputs & Embedded Protecting Circuit
This switch provides two power inputs that can be connected simultaneously to live DC power source. If
one of the power input fails, the other live source acts as a backup to automatically support the switch’s
power needs without compromising network service qualities. Also, it supports automatic protection
switching and load balance, while its embedded protecting circuit can protect your system from over
input/output voltages and rectifier malfunctions.
Outstanding Management and Enhanced Security
This switch provides various network control and security features to ensure the reliable and secure
network connection. To optimize the industrial network environment the switch supports advanced
network features, such as Tag VLAN, IGMP Snooping, Quality of Service (QoS), Link Aggregation Control
Protocol (LACP), Rate Control, etc. The PoE switch can be smartly configured through Web Browser,
SNMP Telnet and RS-232 local console with its command like interface. The failure notifications are sent
through e-mail, SNMP trap, Local/Remote system log, multiple event alarm relay.