User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
74
•
Q-in-Q Port Settings
。 No.
Port1 to PortN, where N is based on the total port number.
。 Mode
Set the port to one of the Q-in-Q mode.
The Egress is dependent on the connected device and hence the egress action is skipped.
Mode
Ingress
Q-in-Q Tunnel
Untagged Frames: Add TPID: 0x88A8 tag and forward.
Tagged Frames:
TPID: 0x8100: Add TPID: 0x88A8 tag and forward.
TPID: 0x88A8: Forward the frames.
Mode
Ingress
Customer
A port set to “Customer” runs typically 802.1Q VLAN.
Untagged Frames: Add TPID: 0x8100 tag and forward.
Tagged Frames:
TPID:0x8100:
Same VLAN ID: Forward the frames.
Different VLAN ID: Discard the frames.
TPID:0x88A8: Discard the frames.
Provider
Untagged Frames: Add TPID: 0x88A8 tag and forward.
Tagged Frames:
TPID: 0x8100: Discard the frames.
TPID:0x88A8:
Same VLAN ID: Forward the frames.
Different VLAN ID: Discard the frames.
Specific Provider
Users define the Ethertype for the Provider service.
Untagged Frames: Add the user-defined TPID tag and forward.
Tagged Frames:
TPID: 0x8100: Discard the frames.
TPID: 0x88A8: Discard the frames.
TPID:[user-defined]:
Same VLAN ID: Forward the frames.
Different VLAN ID: Discard the frames.
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.