User Manual

Table Of Contents
83
Configure 802.1X Port Information
Port Settings
No.
Port 1 to Port N, where N is based on the total port number.
Enable
“Enable” or “Disable” 802.1X function on the port. Yes” means 802.1X is enabled on the port and
the port is locked until it passes the authentication.
Mode
Select the 802.1X mode to “Mac-based” or “Port-based”.
Mac-based: Only the MAC Address, which passed the authentication can connect to the networks.
Port-based: If the port had passed the authentication, every device connected to the port can
connect to the networks.
Re-Auth
“Enable” or “Disable” re-authentication on the port.Yes” means re-authentication is enabled on
the port and the port has to re-authenticate with the server every re-auth period.
Re-Auth Period
This is a time interval, which is used in re-authenticating the server.
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.