User Manual
Table Of Contents
- Intended Readers
- Icons for Note, Caution, and Warning
- I. Product Overview
- I-1 . Product Brief Description
- I-2. Product Specification
- I-3. Hardware Description
- I-4. DIN-Rail Mounting
- /I-5. Console Connection
- The Console port is for local management by using a terminal emulator or a computer with terminal emulation software.
- DB9 connector connect to computer COM port
- Baud rate: 115200bps
- 8 data bits, 1 stop bit
- None Priority
- None flow control
- I-6. Connecting Cable
- II. Preparing for Management
- III. Web Management
- III-1. Web Management - Overview
- III-2. Web Management – Basic Settings
- III-3. Web Management – Redundancy
- III-4. Web Management – Management
- III-5. Web Management – L2 Switching
- III-6. Web Management – Security
- III-7. Web Management – Diagnostics
- III-8. Web Management – Monitoring
- III-9. Web Management – MAC Table
- III-10. Web Management – Maintenance
- Appendix A: IP Configuration for Your PC
- Appendix B: CLI Command Reference
- Revision History
- Federal Communication Commission Interference Statement
- R&TTE Compliance Statement
89
III-8. Web Management – Monitoring
III-8-1. MONITORING – LLDP
LLDP is Link Layer Discovery Protocol and it is a vendor-neutral layer 2 protocol that is defined by IEEE
802.1AB. LLDP is used in advertising identity of the devices, capabilities and neighbors on the LAN. The
information from the neighbors enables the switch to quickly identify the devices and interoperate with
each other more smoothly and efficiently. The neighbor table shows the information about the device
that is next to the port. The LLDP can only get information from the device that is close to it. If the users
want to know the topology of the LAN, they can collect all information from the device and analysis the
neighbor table.
Configure LLDP Information
•
LLDP Mode
“Enable” or “Disable” the LLDP function.
•
LLDP Timer
The LLDP Timer is a time interval to send LLDP messages.
The range of the LLDP Timer is from 5 to 32767 seconds.
The default LLDP Timer is 30 seconds.
•
(Apply Button)
After configuring above fields, click "Apply" button to make the changes effective.