NC-213 Series Quick Installation Guide 02-2012 / v1.
COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): z z z z z 1 x Network camera 1 x Power adapter 1 x CD (with utility software, user manual & multi‐language QIG) 1 x Quick installation guide 1 x Accessory kit INSTALLATION 1. Carefully remove the protective cap(s) from the lens and the network camera. Note: The lens is not included in this package. 2.
3. If you have an auto iris lens, connect the lens’ iris control cable to the network camera’s iris control port. Note: Do not connect the iris control cable before connecting the lens to the camera. 4. Secure the network camera to a tripod, camera housing, or pan and tilt cradle via the tripod socket(s) on the camera.
. Connect the network camera to a router/switch in the network via the Ethernet port. Note: The NC‐213E (PoE model) supports the IEEE 802.3af PoE standard. It can be powered via the Ethernet cable when connected to a PoE switch. 6. Plug the power adapter to a power outlet, and then connect it to the power connector on the network camera.
7. You should then see the left LED on the Ethernet port light up. If not, please try the above steps again, or contact your dealer for help. ACCESSING THE NETWORK CAMERA’S MANAGEMENT INTERFACE By default, the network camera automatically obtains an IP address from the DHCP server on your local network. Check your DHCP server’s IP address lease table to find the network camera’s IP address, or use the EdiView Finder utility included in the CD. 1. Insert the CD into your CD‐ROM drive.
2. After the installation is complete, double‐click the “EdiView_Finder” icon to execute the application. 3. Click “Discover” to search for all the network cameras on your local network (make sure all the network cameras are powered on and connected to network first). 4. When you find a network camera, select it and click “Link” to access it via web browser.
Note: You can also access the network camera’s management interface by entering the network camera’s IP address in the web browser’s URL bar (use Internet Explorer 7 and above for full functionality). 5. Log in the network camera. The default username is “admin” and the default password is “1234”. 6. The browser might ask you to install the ActiveX plug‐in. Allow the browser to install the plug‐in when prompted or you will not be able to see the videos in the network camera.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC. Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2004/108/EC, 2006/95/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European LVD directive (2006/95/EC) and EMC directive (2004/108/EC). Equipment: Model No.: Report No.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
14