Office +1 OAP1300 Snelstartgids 11-2020 / v1.
I Korte samenvatting en herinnering 1. U kunt alle ondersteunende documenten, video's en programma's vinden via: www.edimax.com/edimax_pro/download/Office1-2-3 2. Voor de complete introductie van het Office 1-2-3 systeem, ga naar de onderstaande link: http://office123.edimax.com 3. Er kan zich slechts een Office 1-2-3 master unit in het netwerk bevinden. De rest zijn Office +1. 4.
II II-1 Productinformatie Inhoud van de verpakking 1 2 3 4 5 6 7 8 1. OAP1300 Access Point 2. Magnetische muurmontage template 3. Magnetische muurmontage schroevenset 4. CD 2 5. Snelstartgids 6. Ethernetkabel 7. Paalmontage band X2 8.
II-2 Systeemvereisten - Bestaande kabel/DSL-modem & router - Computer met webbrowser voor de acces point configuratie II-3 Hardware-overzicht Poorten en knop C A B C LAN 1 POE-IN LAN 2 POE-UIT Resetten B A LAN-poort met Power over Ethernet (PoE )IN LAN-poort met PoE UIT Resetknop 3
II-4 LED-status LED 5G (WLAN) 2.4G (WLAN) LAN (PSE) LAN (PD) Status Voeding LED-status Aan Uit Aan Uit Aan Knipperend Uit Aan Knipperend Uit Aan Uit Aan Knipperend Uit Beschrijving Draadloos ingeschakeld. Draadloos uitgeschakeld. Draadloos ingeschakeld. Draadloos uitgeschakeld. LAN-poort verbonden. Activiteit (verzenden en ontvangen). De LAN poort is niet verbonden. LAN-poort verbonden. Activiteit (verzenden en ontvangen). De LAN poort is niet verbonden. Access Point aan het opstarten. Geen fout.
II-5 Resetten Als u problemen ondervindt met uw access point dan kunt u het apparaat terugzetten naar de standaard fabrieksinstellingen. Hierdoor worden alle instellingen teruggezet naar standaard. 1. Druk op de resetknop op het access point en houd deze ten minste gedurende 10 seconden ingedrukt, laat daarna de knop los. Wellicht moet u een speld of gelijksoortig scherp object gebruiken om de resetknop in te drukken. 2. Wacht tot het access point opnieuw opgestart is.
III Toevoegen van Office +1 AP naar Office 1-2-3 Deze snelle set-up helpt u om de Office +1 AP toe te voegen aan uw bestaande Office 1-2-3 high-speed draadloos netwerk. 1. Identificeer de PoE switch die verbonden is met het bestaande Office 1-2-3 netwerk. 2. Sluit de Office +1 AP aan op de PoE switch met behulp van een ethernetkabel. Controleer of de Ethernetkabel verbonden is met de PoE poort van het access point zoals hieronder weergegeven: 3.
IV Vervangen van de Master AP NB: Er kan maar EEN Master AP in uw netwerk zijn. Gebruik deze procedure alleen als uw Master AP defect is en vervangen moet worden. Dit onderdeel is een stap-voor-stap procedure die u begeleidt bij het vervangen van de originele Master AP, waarbij u eerst de firmware van de Master AP bijwerken gevolgd door het herstellen van de eerder opgeslagen systeeminstellingen.
2. Zoek uw Office +1 AP door op “Ontdekken” de IP finder. 3. Klik op het IP-adres van het access point dat u Master wilt maken, en ga naar de web user-interface.
Als u de webpagina binnengaat, moet u gevraagd worden om uw gebruikersnaam en wachtwoord in te voeren (standaard gebruikersnaam: admin, wachtwoord: 1234) om verder te gaan: De web gebruikers-interface wordt hieronder weergeveven: 9
4. Klik op het pictogram "Systeeminstellingen”. Upgraden van Firmware 5. Scroll naar de onderkant van de pagina om de "firmware upgrade”te vinden. Als u de nieuwste firmware niet heeft, ga dan naar de onderstaande URL om deze te downloaden: www.edimax.com/edimax_pro/download/Office1-2-3 Lokaliseer de Master firmware en klik op het download-pictogram om te downloaden. 6. Klik op "bestand kiezen”om het bestand van de master firmware te selecteren. 7.
Een herinnering wordt weergegeven, klik op “OK” om verder te gaan. Het systeem is aan het updaten, een moment geduld... 8. Als u de webpagina binnengaat, wordt u gevraagd om uw gebruikersnaam en wachtwoord in te voeren (standaard gebruikersnaam: admin, wachtwoord: 1234) om verder te gaan: 9.
Er worden meer systeemberichten weergegeven, klik op “OK” om verder te gaan. Het systeem is aan herstarten, een moment geduld... 10.
11. Klik op het pictogram "Systeeminstellingen”. Instellingen terugzetten 12. Scroll naar beneden om de "Firmware Upgrade” te vinden. 13. Klik op de “Bestand kiezen”knop om het bestand met de eerder opgeslagen instellingen te vinden op uw computer. 14. Klik op “Herstellen” om uw bestaande instellingen te vervangen. Als uw instellingen versleuteld zijn met een wachtwoord, vink dan het vakje “Open bestand met wachtwoord” en voer het wachtwoord in het volgende veld in.
V Hardware-installatie Nadat u het bovenstaande set-up proces heeft doorlopen, kunt u het access point verplaatsen naar een door u gewenste locatie. V-1 Antenne De antenne moet worden vastgeschroefd op het access point.
V-2 1. Opladen van de Access Point Outdoor Verwijder de kap aan de onderzijde van het Access Point door 1) de haak omhoog te trekken, en 2) de kap naar beneden te drukken, zoals hieronder weergegeven: Onderzijde van de cap 2. Sluit een Ethernetkabel aan op de LAN 1 (PoE-In) poort van het access point en de PoE switch om het access point op te starten. LAN 1 (PoE) poort 3. Het access point wordt aangedreven door de PoE switch. Sluit een andere Ethernetkabel aan op LAN 2 indien nodig. 4.
5. Laat de haak klikken met het access point en controleer of deze niet makkelijk loskomt. De kap dient als een regenbestendig ontwerp dat geschikt is voor gebruik buiten.
V-3 Montage Nadat u het access point heeft opgestart, monteer het op de gewenste manier: Muur of Paalmontage Muurmontage Bevestig de steun en het access point tegen de muur met gebruik van de muurmontage template en de schroeven en pluggensets.
Paalmontage Bevestig de steun en het acces point tegen de muur met gebruik van de paalbandjes.
Professional installation warning: This device is point-to-multi-point device. The general user should not attempt to install or change settings, it needs to be installed by a qualified personal who has RF exposure and related rule knowledge or technology. The installation position and output power does not exceed the limit set forth in US Rule CFR 47 part 15 section 15.247 & 15.407. If violate the rule, could lead to serious federal penalty. It is complies with §15.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: AC1300 Outdoor AP Model No.: Office +1 OAP1300 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EMF : EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) : EN 301 489-1 V2.1.1 (02-2017) Draft EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.